Reminder from deep hole drilling and boring machine manufacturers: Careful disassembly is required for deep hole drilling and boring machines!

The assembly accuracy of key components in the dismantling of deep hole drilling and boring machines must be ensured to maintain the original assembly position relationship during reassembly, without affecting the integrity and damage of the parts. Printing and marking must be completed before dismantling. Be cautious and safe when dismantling deep hole drilling and boring machines. When disassembling, carefully check that the locking screws and steel plate parts are open.

The deep hole drilling and boring machine is equipped with safety control indicator devices, such as spindle load value table, feed rate, cutting fluid pressure gauge, cutting fluid flow controller, digital filter controller, and CNC cutting fluid temperature monitoring.
Before the deep hole drilling and boring machine drills into the workpiece, it is necessary to ensure the guidance of the tool and the accurate position of the tool head. The shaft sleeve must be guided to maintain a close distance with the end of the workpiece, and both should be in close proximity.

Production performance: refers to productivity. This refers to the batch size of deep hole drilling and boring machine tool parts, mainly considering the cost of tool selection and processing. For example, the use of special tools in large-scale production may be cost-effective, while in single piece or small batch production, the selection criteria are more suitable for some deep hole drilling and boring machine tools.
Machine type: The influence of CNC machine tools used in the machining process on the selection of tool types (drill bit, turning tool, or milling cutter) for deep hole drilling and boring machines. High productivity tools such as high-speed cutting tools and large feed turning tools can ensure the rigidity of the workpiece system and the deep hole drilling and boring machine tool system.
There are two types of deep hole drilling and boring machines: general type, special type, and ordinary lathe. In order to facilitate cooling and chip removal, deep hole drill bits are arranged horizontally, and the main parameters of deep hole drill bits are large drilling depth. Automatic cutting requires selecting the appropriate feed speed and adjusting the travel limit block. Manual cutting is generally carried out according to the principle of gradually increasing and decreasing pressure to avoid accidents caused by excessive force. The above is the relevant content about deep hole drilling and boring machines compiled by the manufacturer. Thank you for reading!